Pool Repair
Repair of leaks already located in swimming pools: sealing of return fittings, lights and wall penetrations from the basin, resin lining of circuit pipework, and replacement of parts that cannot be sealed.
If we do not locate the leak, we do not charge for the diagnosis.
What does the service consist of?
Repair services
- Structural — cracks and fissures in the basin: sealed with epoxy resins.
- Underwater — lights, skimmers and return fittings: repair and sealing of built-in elements; depending on the case and the product, without draining the pool.
- Hydraulic — pipes and circuits: repair of pressure-side, suction-side, overflow and plant-room pipework.
What can be repaired from inside and what cannot
Many repairs are carried out from inside without opening pipes or excavating: resin lining, polymer injection and sealing allow circuits, fittings and lights to be repaired directly.
Three operations should be distinguished: emptying the basin (resin lining a circuit pipe does not usually require this), isolating and emptying only the affected section of pipe, and drying that section, which is a requirement for resin lining. Sealing fittings, lights or wall penetrations from the basin is a different operation and, depending on the case and the product, can be done without draining the pool.
Resins are chosen for their compatibility with chlorine and pressure; durability depends on the product and the application.
An opening (inspection opening) or replacement of the part is needed when the flexible hose is flattened, there are several consecutive bends, the break is visible, or the main drain or valve is broken: this cannot be sealed from inside.
By circuit
- Skimmer: the connection between skimmer and pipe is sealed by polymer injection; if the housing is cracked, resin lining does not repair it and the skimmer is replaced.
- Pressure side (return): straight sections with a crack are resin lined; fittings are sealed with elastomers; a split pipe is replaced.
- Pool sweep or pool cleaner: clamp or hose if the connection leaks; resin lining if there is a crack in a buried pipe; replacement if it is broken.
- Main drain: if the valve leaks it is replaced; if the pipe leaks, the pressure is tested and a choice is made between resin lining and replacement.
- Free phone assessment and no-obligation quote
Main advantages
- Decision after inspection: pressure test, review and, where possible, a camera inside the pipe before proposing resin lining or replacement.
- Basin full: for most circuit sealing and resin lining work.
- Qualified divers: for underwater sealing when the work requires it.
How We Work, Step by Step
- 1
Prior location
We start from the located point: our leak detection report or an earlier one.
- 2
Assessment
Circuit pressure test, visual inspection and a camera where possible.
- 3
Repair
Sealing from the basin, resin lining of the isolated and dry section, or replacement of the part.
- 4
Check
New pressure or level test to verify that the loss has stopped.
What our customers say on Google
""
Frequently Asked Questions
Request a no-obligation quote
24-hour phone service. We will give you the visit date when the service is confirmed.
Contact us
Fill out the form and we will respond shortly.
Related Articles
Pool repair without works: what can be resin-repaired or sealed and what cannot
Many pool repairs are done from inside with resin and injection, without digging. Here we explain what can be fixed this...
How to Detect Leaks in Pools Without Draining Them
Circuit pressure tests, dye, diver, camera and geophone: which method to use in each case to locate a leak without drain...
Other related services
Service areas
We work in the provinces of Valencia, Alicante, Murcia, Albacete and Almería. For other areas, please ask us.