Pipe Repair Without Excavation
Rehabilitation of pipes from the inside (resin lining or CIPP lining) when camera inspection confirms it is viable; prior quote without obligation.
If we do not locate the leak, we do not charge for the diagnosis.
What does the service consist of?
A pipe broken inside the wall or under the floor? Demolition is not always required. At Telefuga we repair damaged pipes from the inside using trenchless rehabilitation techniques when inspection confirms they are viable.
Techniques we use
- Interior epoxy resin: an internal coating that seals cracks and creates a new watertight surface.
- CIPP lining: a textile liner impregnated with resin, introduced and cured in situ to form a new pipe.
How it is done
Before deciding, a camera inspection of the section is required: only by viewing the interior can it be known whether there is a fine crack (resin lining), a single break or a flattened pipe (replacement).
The water supply to the affected section is cut off, and its interior is emptied and dried before the resin is applied; how it is dried and how long it takes depend on the product and the installation.
The resin is injected or applied, flows through the pipe, adheres to the walls and penetrates cracks and fissures; as it cures, it forms a new impermeable inner wall.
At the end the circuit is pressurised and checked to hold pressure without losses; if any point was not properly covered, it is detected at this stage. In pipes that carry drinking water, only products suitable for potable water are used.
When it works and when it does not
It works well on cracks, localised corrosion, weak joints and pores in supply pipes, and on pool pressure-side or pool-cleaner pipes.
It is not suitable if the pipe is collapsed or flattened, if there are several consecutive bends or changes of material that prevent the resin from flowing, if there are multiple breaks in the same section, or if there is no access for the camera. Lining reduces the internal diameter somewhat and does not correct errors of fall or routing.
- Free phone assessment and no-obligation quote
Main advantages
- Camera inspection before quoting: the choice between resin lining, spot patch or replacement is made with the interior in view.
- Final pressure test: documented before the work is closed.
- Only where viable: if the pipe is flattened or broken in several places, we say so and quote the replacement.
How We Work, Step by Step
- 1
Camera inspection
Interior run of the section to locate the damage and rule out other weak points.
- 2
Isolate, empty and dry
Water cut off to the section, which is then emptied and dried according to the product.
- 3
Resin or lining
Application of the resin or the liner and curing for the time the system specifies.
- 4
Pressure test
Pressurisation and verification that there are no losses.
What our customers say on Google
""
Frequently Asked Questions
Request a no-obligation quote
24-hour phone service. We will give you the visit date when the service is confirmed.
Contact us
Fill out the form and we will respond shortly.
Service areas
We work in the provinces of Valencia, Alicante, Murcia, Albacete and Almería. For other areas, please ask us.